The method of coating waterproofing

Coating waterproofing is a single -layer or multilayer coating. The thickness of such isolation ranges from a few millimeters to five centimeters. Used to protect the house from atmospheric moisture and isolate foundations from groundwater. Solutions for coating waterproofing can be made on the basis of bitumen or cement.

Solutions for coating waterproofing can be made on the basis of bitumen or cement. For example, hard coating insulation IVSIL G Wasts can be found by clicking on the link.

The main advantages of coating waterproofing agents are the simplicity of use and a short time required to process the room. That is why they are used at industrial facilities of huge sizes. However, the use of coating waterproofing is convenient in private houses and garages. It is also worth noting that this is an economical method of waterproofing.

Plastic waterproofing solutions can be applied not only to even surfaces, they are perfect for embarrassing shallow cracks and small cavities. With their help, you can simultaneously fix small flaws of the surface and make the walls waterproof.

The most difficult moment in the entire process is perhaps the choice of solution. It is necessary to take into account many factors: climatic conditions, temperature during work, the area of ​​the processed surface, the load of which will be subjected to the processed surface. An important factor when choosing mastic is the price. The scatter of prices in the market is quite large.

In individual construction, it is best to use hot bitumen-polymer and cold mastics based on organic solvents. They are applied with ordinary brushes, spatulas, rollers. It is necessary to control the thickness of the applied layer, trying to make it the same throughout the area. Using solvent mastics, much attention should be paid to fire safety.

It is best to apply the solution in dry weather, observing all the manufacturer instructions and safety regulations. It must be remembered that the polymerization time of all solutions is different. There are compositions that harden in one day, others can polymerize up to ten days.