How to put a carpet with your own hands

Before proceeding to laying the carpet, it is necessary to check the base for evenness. With a level of a level of more than 4-5 mm, the carpet will “crawl” over time, even if it was fixed. If there are protrusions or recesses, the floor must be leveled. The alignment method depends on the material of the base. On a wooden base, you should go through a cycle.

The preparation of the coating is to withstand the carpet in the room for three days. The roll should warm up and purchase the humidity of the room. To roll the coating, you will need a solid clip. The painting video cannot be used, since the particles of the roller material can leave stripes on the carpet, from which it will be difficult to get rid of. The coating is cut with a knife.

So that the carpet can be fixed, first it is necessary to dismantle skirting boards. The material is laid on the base and wrap the material on the walls. Carpet is smoothed with a roller and cut. The edges need to be bent and the skirting boards must be installed. Fixing holes are filled with liquid nails.

Also, to fix the coating, you can take a bilateral tape. It is glued around the perimeter and in the center of the room. After the flooring of the carpet, it is leveled. Then half the material is wrapped and the protective tape is removed. Similar actions are performed with the other part.

Many people today in our country are owners of their own houses. On this site they are offered to repair the roof of a private house, carried out by highly qualified specialists, relatively inexpensive and sufficiently compressed terms. Roofing is the most important part of the structure!