How to build a bathhouse from a beam with your own hands?

If you decide to build a bathhouse from a bar, then you should, first of all, be responsible for choosing wood. After all, the operational characteristics of the steam room will directly depend on it.

The first thing you will need to pay attention to is the lack of cracks in logs. Even the smallest cracks can give a certain defect during shrinkage. So this can cause wood decay. You can harvest a beam and yourself. But it is better to do it in the cold season. After you cut down the tree, it will be necessary to let it depart for at least a month. After that, it will be necessary to inspect the wood and leave only high -quality logs. After that, you can start processing the future building material.

If you built a house from a bar, then perhaps you would need soundproof materials. You can purchase them at the company of eco -soundizol at affordable prices. In the company you can purchase modern German soundproof panels.

You can build a bathhouse from a bar on a column or tape foundation. In order to make a strip foundation, it is necessary to build formwork and pour them with concrete. The height of the foundation itself should not exceed two meters in height. So you can protect the lower bars from dampness. Inside the perimeter it will be necessary to pour crushed stone. In a couple of weeks, concrete will freeze, and you can lay a log house.

In order to make a columnar foundation, it will be necessary to set brick pillars around the perimeter. Under each column you will need to make a concrete “pillow”.